|
Product Details:
Payment & Shipping Terms:
|
Product Material: | Cu,Al,Cu2O | Usage: | Suitable For Oil And Gas Transportation Pipelines, Storage Tanks, Bridges, Offshore Construction And Other Cathodic Protection System. |
---|---|---|---|
Including: | Mold With Clamp, Welding Powder | Package: | Bag Or Plastic Bottle + Carton+wooden Case |
Cathodic Protection Aluminum Heat Welding has the advantages of high welding speed, high welding speed (high construction efficiency), small welding heat (little damage to pipeline, can be regarded as zero damage), easy welding quality control, no water and electricity (especially for field operation).
Suitable for oil and gas transportation pipelines, storage tanks, bridges, offshore construction and other cathodic protection system.
Welding performance operation:
1, welded junction resistance: <410-4;
2, the welding strength: after soldering joint strength is greater than the carrying capacity of copper cable.
2, the use of
(1) parallel to the cable penetration is placed on the pipeline welding mode;
(2) Copper welding mold placed in the hole at the top (cover the hole);
(3) followed by aluminum heat flux, an ignition agent is placed in the upper part of copper;
(4) with a match (flame) or direct ignition point guns;
(5) welding die quickly after ignition cover to cover, subject to the completion of combustion.
(6) Before welding, pipe surface to rust, oil.
Mold Code | Suitable Specification | Powder Type |
WY-06A | 6mm2 cable single point connection | 12# |
WY-06B | 6mm2 cable “-” connection | 12# |
WY-06C | 6mm2 cable “T” connection | 12# |
WY-06U | Bottom mold | |
WY-10A | 10mm2 cable single point connection | 15# |
WY-10B | 10mm2 cable “-” connection | 15# |
WY-10C | 10mm2 cable “T” connection | 15# |
WY-10U | Bottom mold | |
WY-16A | 16mm2 cable single point connection | 20# |
WY-16B | 16mm2 cable “-” connection | 20# |
WY-16C | 16mm2 cable “T” connection | 20# |
WY-16U | Bottom mold | |
WY-25A | 25mm2 cable single point connection | 25# |
WY-25B | 25mm2 cable “-” connection | 25# |
WY-25C | 25mm2 cable “T” connection | 25# |
WY-25U | Bottom mold | |
WY-35A | 35mm2 cable single point connection | 30# |
WY-35B | 35mm2 cable “-” connection | 30# |
WY-35C | 35mm2 cable “T” connection | 30# |
WY-35U | Bottom mold | |
WY-50A | 50mm2 cable single point connection | 45# |
WY-50B | 50mm2 cable “-” connection | 45# |
WY-50C | 50mm2 cable “T” connection | 45# |
WY-50U | Bottom mold |
Contact:
KFWELD Electrical Technology Co., LTD
Miss Summer
TEL: 86-21-34977237
FAX: 86-21-34110771
MOB: 86-13917179469
Email: summer@shkfweld.com sales@shkfweld.com admin@shkfweld.com
QQ: 1441294061
Skype: lkqf1985
WeChat: lkqf214
Website: www.shkfweld.com